pedal crank removal tool Pedro's Universal Crank Remover Arm Tool

pedal crank removal tool Pedro's Universal Crank Remover Arm ToolCrank Puller for Square Taper and Splined Cranks with Integrated Handle and 8mm Hex Wrench Made from heat treated tool steel. Capable of all functions needed to remove square taper and splined cranks. Includes: Puller with integrated ergonomic handle, inserts for splined and for square taper cranks, and 8mm hex for crank bolt removal. Precision tolerances provide perfect fit and floating tip design ensures easy crank removal. Pedro's Universal Crank

Crank Puller for Square Taper and Splined Cranks with Integrated Handle and 8mm Hex Wrench

• Made from heat-treated tool steel.
• Capable of all functions needed to remove square taper and splined cranks.
• Includes: Puller with integrated ergonomic handle, inserts for splined and for square taper cranks, and 8mm hex for crank bolt removal.
• Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.

Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks and unlike similar items offered by the competition, we include everything you need in one convenient package The Universal Crank Remover fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles and splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. The 8mm hex wrench is perfect for crank bolts and can also be used in pedals with 8mm broach. Pair with a standard 15mm pedal wrench for easy pedal removal. Backed by Pedro's lifetime warranty.

Replacement Part: Splined Tip Insert for Crank Removers

Replacement Part: Square Taper Tip Insert for Crank Removers

Usage

1. Remove the Crank Bolt. Rotate the crank arm to access the fixing bolt. Use the 8mm hex on the back of the tool to loosen and fully remove the crank bolt or nut from the center of the crank arm. Some cranks may use a 14mm hex bolt requiring use of a 14mm socket tool instead.
2. Prepare the Crank Remover. Inspect the threads on your crank arm and on the crank puller tool to ensure they are clean. For smaller square taper bottom brackets/cranks, insert the small diameter insert/tip into the end of the tool. For larger splined bottom bracket axles, insert the large diameter insert/tip into the end of the tool. Thread the large outer portion of the tool to the end so the insert/tip no longer protrudes from the end.
3. Thread the Crank Remover into the Crank Arm. Thread the large outer threads of the crank remover into the crank arm by hand clockwise. Make sure it’s fully threaded in and straight. Start slowly to avoid cross-threading. Once snug by hand, you can tighten a bit more with your fingers or a wrench but don’t over-torque.
4. Turn the Crank Puller’s Handle. Start turning the handle on the tool clockwise. At first it will likely turn easily with no resistance. As you turn, the center and insert/tip move towards the bottom bracket and will then push against the bottom bracket spindle pulling the crank arm outward. This may require applying significant force on the tool handle at first. Keep turning and force needed should lessen. Support the crank arm as it is removed. When fully loosened it will fall off the bottom bracket spindle.
5. Remove the Tool from the Crank Arm. Unthread the large outer threads of the crank remover from the crank arm by turning counterclockwise. If it is stuck, a wrench may be needed.
6. Repeat Steps 1-5 for the other crank arm.